| Nga taonga | Te kaha |
| whakarōpūtanga poari | Konumohe turanga, parahi Turanga,Turanga rino,turanga karamu he parahi-kakahu,Paari Bade Whakakotahi |
| rauemi | I roto i te kainga Konumohe, Te parahi o te kainga, te konumohe kawemai, te parahi i kawemai |
| maimoatanga mata | HASL/ENIG/OSP/hiriwa |
| pūkete paparanga | papa taia kotahi-taha/paari taarua-taha |
| maxi.board Rahi | 1200mm*480mm |
| te rahi o te poari | 5mm*5mm |
| tohu whanui/apsce | 0.1mm/0.1mm |
| takahurihuri | <=0.5%(te matotoru:1.6mm,Papa Rahi:300mm*300mm) |
| te matotoru o te papa | 0.5mm-5.0mm |
| parahi matotoru matotoru | 35um/70um/105um/140um/175um/210um /245um/280um/315um/350um |
| V-CUT tohu tohu | Ararere CNC: ± 0.1mm; punch: ± 0.1mm |
| Rehitatanga V-CUT | ±0.1mm |
| Te matotoru parahi pakitara poka | 20um-35um |
| Min rehitatanga o te waahi poka (hotahi me nga raraunga CAD) | ±3mil(±0.076mm) |
| Min.poka pupuhi | 1.0mm i raro，1.0mm(Te matotoru o te papa raro1.0mm,1.0mm) |
| Min.punching mokamoka tapawha | 1.0mm i raro，1.0mm*1.0mm (Te matotoru o te papa i raro i te 1.0mm, 1.0mm*1.0mm) |
| Te rehitatanga o te ara iahiko taia | ±0.076mm |
| Min.drill poka diameter | 0.6mm |
matotoru o te maimoatanga mata | whakakikorua koura:Ni 4um-6um,Au0.1um-0.5um ENIG:Ni 5um-6um,Au:0.0254um-0.127um hiriwa:Ag3um-8um HASL:40um-100um |
| V-CUTdegree kātakí | ±5(Waeke) |
| Papa V-CUT matotoru | 0.6mm-4.0mm |
| Min.Lefend whanui | 0.15mm |
| Min.Solder whakatuwhera kanohi kanohi | 0.35mm |